Panasonic SDR-S7P/PC operating instructions Others 4 Troubleshooting, Power does not turn on

Models: SDR-S7P/PC

1 116
Download 116 pages 59.35 Kb
Page 90
Image 90

Others 4 Troubleshooting

Problem

The power does not turn on.

The status indicator is flashing while using the battery.

Power shuts off on its own.

Power shuts off as soon as it is turned on.

The battery runs down quickly.

What to check

Is the battery sufficiently charged?

To conserve the battery, power automatically shuts off if the unit is not operated for about 5 minutes. To resume unit use, set the mode dial to [OFF] and then the desired mode position.

When [POWER SAVE] is set to [OFF], power does not shut off automatically. (P.84)

Is the battery run down?

Charge the battery if the remaining battery life indication is flashing or the [LOW BATTERY] message appears on the LCD monitor. (P.22)

●Is the battery sufficiently charged?

●Is the unit being used in low temperatures?

The battery is affected by ambient temperature. In cold places, battery availability shortens.

●Is the battery at the end of its service-life?

If the battery lasts only a short while when fully charged, it has reached the end of its service-life.

The battery is swollen.

The unit cannot be operated though it is turned on.

The unit does not operate normally.

The lithium ion battery used with this unit may swell if charged/discharged often, but this is no risk to safety.

●Is the LCD monitor open?

●Check that the card access lamp is out, then eject the SD card, remove the battery or disconnect the AC adaptor, wait about 1 minute, then reinsert the battery or reconnect the AC adaptor. Then about 1 minute later, shut power off and turn back on. (Performing the above operation while the SD card is being accessed can damage data.)

90 VQT1R00

Page 90
Image 90
Panasonic SDR-S7P/PC operating instructions Others 4 Troubleshooting, Power does not turn on