24
VQT2L14
Caution:
Check that the access lamp has gone off.
1Open the LCD monitor.
2Open the SD card cover and insert (remove) the SD card into (from)
the card slot.
≥Face the label side B in the direction shown in the illustration and press it straight in as far
as it will go.
≥Press the center of the SD card and then pull it straight out.
3Securely close the SD card cover.
≥Do not touch the terminals on the back of the SD card.
≥See page 113 for details on handling the SD card.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format th e SD card. (l76) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp [ACCESS] A
≥When this unit is accessing the SD card or built-in memory, the access l amp lights up.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 24 ページ 2009年12月22日 火曜日 午前10時33分