75
VQT2L14
≥If there is not much remain ing capacity in the SD card , a confirmation message as king to
copy after deleting all data on the SD card is displayed. Be aware that deleted data ca nno t
be restored.
1Change the mode to .
≥Use a sufficiently charged battery or the
AC adaptor.
2Select the menu. (l27)
/
≥Select to copy information from
the built-in memory to the SD card, or
select to copy information from
the SD card to the built-in memory, then
press the center of the joystick to confirm.
≥Select to copy information from
the HDD to the SD card, or select
to copy information from the SD
card to the HDD, then press the center of
the joystick to confirm.
3Follow the screen display, use

the joystick to select the

desired item then press the

center of the joystick.

≥(When [SELECT SCENES] is selected)
Press the center of the joystick to select
the scene, after which will be
displayed. Press the center of the joystick
again to deselect.
≥(When [SELECT DATE] is selected)
Press the center of the joystick to select
the date, which will be outlined in red.
Press the center of the joystick again to
deselect.
≥Up to 99 still pictures or 99 dates can be
set in succession.
≥If 2 or more SD cards are necessary to
copy, change the card following the
instructions on the screen.
4Press the MENU button after

the copying complete message

appears.

≥The thumbnail view of the copy
destination is indicated.
When you stop copying halfway
Press the MENU button while copying.
≥When the disc playback is selected while
a DVD burner (optional) is connected,
menus are not displayed.
≥Depending on the following conditions, the
time it takes for copying may be longer.
jThe number of recorded scenes is
large.
jThe temperature of the unit is high.
≥If some still pictures have already been
recorded to the copy destination, then the
same date may be assigned or images
may not display by date when the list by
date is selected.
≥It may not be possible to copy some still
pictures recorded on other devices.
≥Protection and DPOF settings will be
cleared on the copied still pictures when
copying still pictures with protection and
DPOF settings.
≥The order in which the still pictures were
copied cannot be changed.

Copying [SDR-T55]/[SDR-T50]/[SDR-H85]

[COPY]
SDR-T55
SDR-T50
SDR-H85
If you will delete the still pictures after
copying is complete, be sure to play
back the still pictures to check that
they have been copied to correctly
before deleting.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 75 ページ ２００９年１２月２２日　火曜日　午前１０時３３分