85
VQT2L14

Backup

With other products 2Dubbing images onto
other video devices
Images played back on this unit can be dubbed onto a DVD recorder or video device.
≥Use the AC adaptor to free you from worrying about the battery running down.
1Connect this unit to a video

device and then change the

mode to .

2Start playback on this unit.
3Start recording on the

connected device.

≥To stop recording (dubbing), stop playback
on this unit after stopping recording on the
recorder.
≥If the date and time display and function
indication are not wanted, cancel th em
before dubbing. (l32, 78)

∫Using SD card slot or USB

terminal of other video devices

If you have a DVD recorder with an SD card
slot or a USB terminal, images recorded by
this unit can be copied (dubbed) onto the
hard disk or a DVD disc.
Refer to the operating instructions of your
DVD recorder for information about whether
or not it supports copying (dubbing) from an
SD card or a USB terminal.
When using a USB terminal
Connect this unit to a DVD recorder with the
USB cable (supplied), then select [PC/
RECORDER] on the USB function selection
screen.
VIDEO IN
AUDIO IN
AAV cable (supplied)
≥Insert the plugs as far as they will
go.
≥Do not use any other AV cables
except the supplied one.
≥Select the video input on the
video device and TV that this unit
and the video device are
connected to.
If the dubbed images are played back on
a wide-screen TV, the images may be
stretched vertically.
In this case, refer to the operating
instructions for the device you are
connecting to or read the operating
instructions of the wide-screen TV and
set the aspect ratio to 16:9.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 85 ページ ２００９年１２月２２日　火曜日　午前１０時３３分