NO
mçïÉê=pìééäóªUsing AC Adaptor
NOpen the DC Input Socket Cover and
connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
OConnect the AC Cord to the AC Adaptor
and the AC Main socket.
ªCharging the Battery
Be sure to charge the supplied battery before use.
1While pressing the A part, slide it to
remove the Battery Compartment Cover.
2Press the terminals of the battery onto
the terminals of the Battery Compartment
and set the battery.
≥Fit the battery with its label facing upward.
≥After the battery is set, close the cover.
3Connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
4Connect the AC Cord to the AC Adaptor
and the AC Main socket.
≥Power Lamp 1 flashes, and Charging starts.
≥When recharging, turn the power of the SD Video
Camera off.
5Wait until Power Lamp 1 goes off.
≥When recharging is completed, Power Lamp 1
goes off.
≥If the Power Lamp flashes quickly (or slowly) when
recharging, recharging is not normal. (l78)
≥For other notes, see pages 76, 78.
THE SOCKET OUTLET SHAL L BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE.
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.