OT
oÉÅçêÇáåÖ=jçíáçå=fã~ÖÉë=EjmbdOF
You can record motion images in high quality on the
Memory Card. Therefore, it is suitable for recording
important pictures.
In MPEG2 motion image recording, SD Memory
Card with the high-speed transmission rate of
10 MB/s is needed. Be sure to check available
SD Memory Card on the following web site.
For USA <http://www.panasonic.com/d-snap>
For Canada <http://www.panasonic.ca/english/
accessories/storagemedia/>
[FINE]: 256 MB or more
[NORM]: 32 MB or more
You cannot record MPEG2 motion images on a card
other than the above.
NPress the [REC/PLAY] Button to select

Recording Mode and set the operation

mode to [MPEG2].

OPress the [MENU] Button and set [Quality]

on [Record Functions Setup] to desired

picture quality and then press the

[1SET] Button.
Select one of [FINE] or [NORM].
[FINE]: High image quality 704 k 480 pixels
[NORM]: Normal image quality 352 k 480 pixels
Press the [MENU] Button after completing the
setting.
PPress the Recording Start/Stop Button.
Recording starts.
While recording the motion image, press the
Recording Start/Stop Button to stop recording.
Be sure to clean up the SD Memory Card before
use. (l26)
If you use a 32-128 MB available SD Memory Card,
when you select [Quality] on [Record Functions
Setup] to [FINE] of the MPEG2 motion image
recording mode, an error message [This card cannot
record in MPEG2 FINE mode.] appears on the LCD
Monitor. If you use a MultiMediaCard, an unavailable
SD Memory Card, or an 8 MB and 16 MB SD
Memory Card, when you select the MPEG2 motion
image recording mode, an error message [This card
cannot record in MPEG2 mode.] appears on the LCD
Monitor.
For other notes, see page 80.