UQ
≥As formatting erases all the data, save the
necessary data on a personal computer,
etc. beforehand.
≥Format may take a little time. Wait until the
Card Access Lamp goes out.
ªPlaying Back on an external device (l54)≥Read the Operating instructions of an
external device before connecting SD
Video Camera.
≥When connecting, turn the power [OFF].
≥Part of the characters may be clipped on
the screen, depending on the type of TV.
ªRecording pictures supplied from an external device (l55)≥Pictures containing the copy-protect signal
(copy guard) cannot be recorded.
≥A wide-format picture (picture of 16:9)
cannot be recorded properly.
≥For audio of MPEG4 motion image
recording, the signals from the L (left)
channel and the R (right) channel for
stereo are mixed for recording in
monaural.
≥Do not plug in or pull out the video or
audio cord during recording. The
recording may not be performed correctly.
≥For pictures containing both the main
audio and sub audio to MPEG4 motion
image recording, select either channel
before recording. Otherwise, you will not
be able to select on TV either of the main
audio or sub audio. (Both audio channels
are mixed for recording.)
≥If pictures are recorded when TV
broadcasting signals are weak or pictures
are affected by noise, they may be
distorted or may not even be played back.
≥When recording pictures from other than
an external device, select [Input Source]
on [Record Functions Setup] to
[CAMERA].
ªUsing the DVD Video Recorder with a Hard Disk (l57)≥You can save files on the Hard Disk by
connecting to the DVD Video Recorder
with the supplied AV cable. However, the
picture quality is deteriorated.
ªConnecting with the PC (l63)≥To erase pictures that you recorded on the
Memory Card by using the SD Video
Camera, be sure to erase them on the SD
Video Camera or by the MediaStage for
AV100 (supplied), not on a personal
computer (the explorer, etc.).
≥You may not be able to properly play back
on the SD Video Camera after editing the
recorded data or changing the image data
on a personal computer.
≥Motion Image format (MPEG4) that can be
played back on the SD Video Camera is
ASF. (Depending on the file, it may not be
able to be played back even if it is in ASF
format.)
≥When you operate the SD Video Camera
using its buttons, pull out the USB cable.
(The SD Video Camera cannot be
operated in the [PC ACCESSING] mode.)
≥Use only the supplied USB cable.
≥Do not remove the AC adaptor when the
SD Video Camera is connected to the
personal computer.
≥If the SD Video Camera’s personal
computer peripheral mode
([PC ACCESSING] is displayed) is not
cancelled when the personal computer is
turned OFF, remove the USB cable.
≥If the personal computer switches to the
suspend mode when the SD Video
Camera is connected to it, the personal
computer may not recognize the SD Video
Camera when it reverts to normal mode.
In this case, restart the personal
computer.
≥While MediaStage for AV100 (supplied) is
accessing a CD, the CD may not work
properly in other applications.
AV100PP.book 84 ページ ２００３年８月２２日 金曜日 午後４時３０分