US

ªConstructing a Folder when the

Memory Card is used with a PC

(l65)

≥[DCIM], [SD_VIDEO] etc. are necessary
items in the folder structure. They have
nothing to do with actual operations.
≥The memory capacity indicated on the SD
Memory Card label corresponds to the
total amount of the capacity to protect and
manage the copyright and of the capacity
available as a conventional memory for a
SD Video Camera, Personal Computer or
others.
≥Do not delete any folders located on the
Memory Card. If this is done, the Memory
Card may not be recognized on your SD
Video Camera.
≥The MPEG4 motion image file (ASF
format) can be played on the Windows
Media Player 6.4 or later. If it cannot be
played back, download the appropriate
software (G.726). (G.726 is installed at the
same time as the supplied software,
MediaStage for AV100.)
≥When formatting a Memory Card, format it
on the SD Video Camera.
≥When a motion image is played back on a
personal computer, a black belt may be
present along the top and bottom of the
picture.
≥If data not supported by the SD Video
Camera is recorded on a personal
computer, it cannot be recognized by the
SD Video Camera.
_ÉÑçêÉ=oÉèìÉëíáåÖ=pÉêîáÅÉ
Power
1: The SD Video Camera power cannot
be turned on.
1-1: Is the power source connected
correctly?
1-2: Is the Battery fully charged? Charge it
with the AC Adaptor.
2: The SD Video Camera power shuts
off automatically.
2: If you do not use the SD Video Camera
for more than 5 minutes, the power
shuts off automatically to save the
Battery power.
3: The SD Video Camera power does
not stay on long enough.
3: Is the Battery low? Charge the Battery
or attach a fully charged Battery.
Battery
1: Battery runs down quickly.
1-1: Is the Battery fully charged? Charge it
with the AC Adaptor.
1-2: Are you using the Battery in an
extremely cold place? In cold places,
the operating time of the Battery
becomes shorter.
1-3: Has the Battery worn out? If the
operating time is still short even after
the Battery is fully charged, the Battery
has worn out.
Recording
1: Recording does not start although
power is supplied to the SD Video
Camera and the Memory Card is
correctly inserted.
1-1: Is the SD Video Camera turned on?
1-2: Is the write-protect switch set to
[LOCK]? Being set to [LOCK], the
Memory Card cannot be recorded.
1-3: Does the Memory Card have enough
free space? Check the [Capacity] of a
card, and when there is little free space
available, delete unnecessary data in
the Memory Card. (l51)
AV100PP.book 86 ページ ２００３年８月２２日　金曜日　午後４時３０分