First Time Setup

First time setup screen is displayed inserted into a wall outlet and when

only when the TV is turned on for the first time after the power cord is "Auto power on" (p. 34) is set to "No".

Turn the TV On with the POWER button

(TV)(Remote)

POWER

or

Configure your viewing mode

d_ Select your language

)select

@OK

(2)Select your viewing mode (Be sure to select "Home use")

)select

@OK

÷Please confirm your selection (Home Use) before pressing OK button.

If you select "Store Demonstration" by mistake in _2), confirmation screen will be displayed.

)select

@OK

®Select "No" and return to previous screen (2].

®If you select "Yes", Screen enters the store demonstration mode.

To display the "Set viewing mode" screen again as shown above and select "Home Use", do one of the following:

Press and hold down the side POWER button for at least five seconds.

Unplug power cord for 30 seconds and plug it again.

®If you use any other step other than _ then turn the TV off, or if you used the EXIT button to quit before completing the settings, the next time you turn the TV on, "First time setup" will not be automatically displayed.

The settings up to that point are saved.

You can start "First time setup" at any time. (p. 34)

®Language, ANT/Cable setup, Input labels, Clock can also be changed from the Settings Menu. (p. 34)

12

tc_L3232c_en_O608.indb

12

2010/12/24

13:40:0! I

Page 12
Image 12
Panasonic TC-L3232C manual First Time Setup, Turn the TV On with the Power button, Configure your viewing mode