Make sure the volume is up and MUTE is off.

® Confirm the TV speakers are set to ON by pressing MENU

 

and selecting "Audio"--> "Advanced audio". (p.32)

 

® Check that the correct SAP (Secondary Audio Program) is

Why is there no sound coming

selected by pressing the SAP button on the remote control. (p.15)

® If the TV is connected to a Panasonic Home Theater via

from the TV?

HDMI cable, then check VIERA Link controls. (p.22)

 

® If the TV is connected to a Home Theater via optical cable,

 

then: Check the connection, the audio system is on, the

 

correct input is selected.

 

® Check "HDMI 1 in" or "HDMI 2 in" analog/digital audio

 

Check that the correct SAP (Secondary Audio Program) is

Why is the sound unusual,

selected by pressing the SAP button on the remote control.

 

distorted, low volume or in

connected to the TV are secure.

another language?

 

Why is there a clicking, ticking or buzzing sound coming from the TV unit?

What is the easiest and best

way to connect a High-Definition Cable or Satellite box to the TV?

Why is there no yellow jack (video I input) on the back of the TV?

 

settings. (example: try changing the box'sAudio Range to 'narrow')

_

When TV power is turned on or shut off there are electrical

 

components that make a click sound. This is normal operation.

Changes in the temperature and humidity of the room may

 

cause thermal expansion and contraction that can produce

 

Use an HDMI cable. It carries both digital video and audio

 

signal in HD. HDMI cable is the only cable needed to

 

connect an HD device to the TV.

 

The Video 1 input is shared with the Component input.

 

Just connect the yellow plug into the green jack. Be sure to

 

connect the red and white audio plugs into the appropriate

 

red and white audio inputs. (p. 10)

@

"11

..Q r-

Why does the CC button not display Closed Caption?

Why does the screen and back cover of the TV get warm?

Why doesn't the Remote Control work?

Why is the "ANT/Cable" option at the top of the "Input select" menu gray-out and cannot be selected?

Some menu items are grayed- out and cannot be selected.

Why?

The main unit radiates heat and some of the parts may °_

become hot. This is normal operation and does not affect the performance of the set.

®Ensure good ventilation.

®Do not block the ventilation holes of the TV and do not

Check that the batteries are fresh, are of the same type °_ and are installed with the correct polarity (+ & -).

®To operate other devices, such as changing channels when_ using Cable or Satellite boxes or operating non-Panasonic

During "First time setup", step 3, you indicated that the "Antenna/Cable in" connector is "not used" (p.13). This is the proper setting if the TV is connected to a Cable or Satellite box via any of the other inputs. To re-activate the "ANT! Cable" input, press MENU, select SETUP and then redo the

Depending on certain modes or the selected input, some

only available when the FORMAT is changed to zoom mode.

>

0o

(I)

O_

O

r-

&

o

Oo

43

I

tc_L3232c_en_O608Jndb

43

2010/12/24

13:40:2: I

Page 43
Image 43
Panasonic TC-L3232C manual Why is there no sound coming, From the TV?, Why is the sound unusual, Distorted, low volume or