Panasonic TG7200-7220E operating instructions Battery installation and replacement

TG7200-7220E(e).book Page 11 Tuesday, May 22, 2007 9:34 AM

Preparation

Important:

L If you use a telephone line cord which is not supplied, the unit may not work properly.

Charger (KX-TG7202/KX-TG7203/ KX-TG7222/KX-TG7223/KX-TG7224)

C

Hooks

B

To AC mains outlet (220–240 V, 50 Hz)

USE ONLY the supplied

AC adaptor (smaller).

Note:

LNever install telephone wiring during a lightning storm.

L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

L The AC adaptor should be connected to a vertically oriented or floor- mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

L The unit will not work during a power failure. We therefore recommend you also connect a corded-type telephone (without AC adaptor) to the same telephone line using a T-adaptor. Your Panasonic sales shop can offer you more information about connection possibilities.

Location

LFor maximum distance and noise-free operation, place your base unit:

–away from electrical appliances such as TVs, radios, personal computers, or other phones.

–in a convenient, high, and central location.

Battery installation and replacement

Important:

L Use only the supplied rechargeable batteries noted on page 5, 7.

LUSE ONLY rechargeable Ni-MH batteries AAA (R03) size.

L Do NOT use Alkaline/Manganese/Ni- Cd batteries.

LEnsure correct polarities (S, T) when installing the batteries.

LWipe the battery ends (S, T) with a dry cloth.

L When installing the batteries, avoid touching the battery ends (S, T) or the unit contacts.

L When replacing batteries, we recommend using the Panasonic rechargeable batteries noted on page 6, 7.

1Press the notch on the handset cover firmly and slide it in the direction of the arrow.

Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333 11