Panasonic TG7200-7220E Base unit settings, To customise the base unit using the handset

TG7200-7220E(e).book Page 21 Tuesday, May 22, 2007 9:34 AM

Base Unit Settings

Base unit settings

To customise the base unit using the handset:

1{j/OK}

2Press {^} or {V} to select “Base Unit Setup”. i {>}

3Press {^} or {V} to select the desired item in the base unit settings menu. i

{>}

4Press {^} or {V} to select the desired item in the sub-menu. i {>}

5Press {^} or {V} to select the desired setting then press {>}.

L This step may vary depending on the feature being programmed. L To exit the operation, press {ih}.

Note:

L The current item or setting is indicated by > on the display.

Menu	Sub-menu	Details (default setting)
Ringer Volume*1	—	For base unit (Medium)
Call Options	Recall/Flash	Recall time (“100 msec.”).*2
Other Options	Base Unit PIN	Change base unit PIN (“0000”).*3
		–	Enter the current 4-digit base unit
			PIN.*4
		–	Enter the new 4-digit base unit
			PIN. i {>} i {ih}
	Repeater Mode	(“Off”): page 31

*1 KX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224

*2 Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX.

*3 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.

*4 If you forget your PIN, see page 39.

Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333 21