Advanced PIP
1
2
3
4
Press to display the Setup menu.
Press to select “OSD Language”.
Press and hold until the Options menu is displayed.
Press to select Advanced PIP.
|
|
|
| Options |
| 1/3 |
|
|
|
|
|
|
|
|
|
|
|
|
| Enable |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| Onscreen display | On |
|
|
|
|
|
|
|
|
|
|
5 |
| Press to adjust the menu. |
| Initial INPUT | Off |
|
|
|
|
|
|
|
| ||
|
| Initial VOL level | Off | 0 |
| ||
| Off : Sets normal two screen display mode |
|
|
|
|
| |
|
| Maximum VOL level | Off | 0 |
| ||
|
|
|
|
|
|
| (see page 22). |
| INPUT lock | Off |
|
| Studio W/B | Off | |
| On : Sets Advanced PIP mode. |
| ||
|
| Advanced PIP | Off | |
| Press to confirm. |
| Display size | Off |
| Advanced PIP |
| ||
| One screen |
| ||
6 | Press to exit from |
|
|
|
Options menu. |
|
|
| |
|
|
|
| |
(When Advanced PIP is On) | Sub screen | Main screen |
| |
7 | Press repeatedly. |
|
|
|
| Each time pressing this |
|
|
|
Note:
button main picture and sub picture will be displayed as above.
Notes: To use 
, 
, 
, 
buttons for the screen operations, follow the procedures in the previous page.
• Advanced PIP corresponding signal
Sub screen | Main screen |
NTSC, PAL, SECAM (tuner, video) | 640x480@60Hz, 852x480@60Hz, 1024x768@60Hz, |
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, | 1366x768@60Hz (RGB, DVI, HDMI) |
1250/50i (Component Video, RGB, DVI, SDI, HDMI) | 1280x768@60Hz (DVI) |
•Sound output is from the picture which is selected in Audio OUT (PIP) (See page 26).
•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
•The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the
•Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
•Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily.
•Following combinations of two analog signals cannot be displayed simultaneously;
Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
•Following signals are not applicable to this menu.
1125 / 50p • 60p, 1152 × 864 @60 Hz, 1400 × 1050 @60 Hz, 1600 × 1200 @60Hz, 1920 × 1200 @60 Hz
•Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.
23
