21
HOTEL MODE Setup
Item Details
Initial Input
Off AV1 AV2 YPbPr HDMI1 HDMI2 HDMI3 PC
Adjusts the input signal when the unit is turned on.
Off: The input signal when the power was last turned off is set.
Note:
This menu is available only when "Input Lock" is "Off".
Onscreen Display
Off: Onscreen information is not displayed.
On: Onscreen information is displayed.
On 1: Onscreen information is displayed, except some RS-232C communication information is not
displayed.
Initial VOL Level
Used to set the volume level at power-on.
Off: The volume is set to the same level as when the power was last turned off.
0 to 63: The volume is set to the selected level.
Note:
It is not possible to select an Initial VOL Level setting which is higher than the Maximum VOL Level setting.
Maximum VOL Level
Used to set the volume level so that it will not exced the maximum setting.
Off: No restrictions are placed on the volume level.
0 to 63: The volume is restricted to the selected level.
Note:
It is not possible to select a Maximum VOL Level setting which is lower than the Initial VOL Level setting.
Input Lock
Off AV1 AV2 YPbPr HDMI1 HDMI2 HDMI3 PC
Locks the input switch operation.
Off: Input switch can be used.
Button Lock
Used to restrict the operation of the buttons on the main unit.
Off: All the buttons on main unit can be used.
Menu: Locks the Menu button on the main unit.
On: Locks all the buttons on the main unit except the Power button.
Remocon User Level
Off User1 User2 User3
Off: You can use all of the buttons on the remote control.
User1:
You can only use
POWER
,
INPUT
, ,
MUTE
,
VOL
buttons on the remote control.
User2: You can only use
POWER
button on the remote control.
User3:
Locks all the buttons on remote control.
Note:
Hotel Mode menu may not be accessed when you select "User2" or "User3". When this happens, press
and hold the VOL - key on the display, then press the OK button on the remote control. The message "Are
you sure to out the mode?" will appear, select Yes.
Hotel Mode Menu List