Accessories
Attaching the Pedestal to the Plasma Display
•WARNING:
•• Do not disassemble or modify the pedestal.
Otherwise the Plasma Display may fall over and become damaged, and personal injury may result.
• CAUTION:
•• Do not use any other Plasma Displays.
Otherwise the Plasma Display may fall over and become damaged, and personal injury may result.
•• Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately.
•• During
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the Plasma Display, and it might fall over and become damaged, and personal injury may result.
•Ensure that the Plasma Display does not fall over.
•If the Plasma Display is knocked or children climb onto the pedestal with the Plasma Display installed, the Plasma Display may fall over and personal injury may result.
•• Two or more people are required to install and remove the Plasma Display.
If two or more people are not present, the Plasma Display may be dropped, and personal injury may result.
A Assembly screw (4) | B Assembly screw (4) | C Pole (2) | D Base | |
(silver) | (black) | •R:TBLA3689 | •TBLX0132 | |
• | XYN5+F18FN | •THEL062N | ||
| •L:TBLA3690 |
| ||
|
|
| L | R |
| M5 X 18 | M5 X 25 |
|
|
■Assembling the pedestal
Use the four assembly screw A to fasten the left and right poles to the base securely.
•Make sure that the screws are securely tightened.
•Forcing the assembly screws the wrong way will strip the threads.
•"L"pole.or "R" mark is stamped on the bottom of the
R
D
A |
Front
L
■Securing the Plasma Display
Use the four assembly screw B to fasten securely.
•Make sure that the screws are securely tightened.
•Carrysurface.out the work on a horizontal and level
View from the bottom
Hole for pedestal installation
B
Arrow mark
D
