31
MULTI DISPLAY Setup
MULTI DISPLAY Setup
Ratio On
2 2
Location A1
Press to select Ratio (2nd step).
Press to select “2×2”, “3×3”.
How to set the display location number for each Plasma DisplayPress to select Location.
Press to select the required arrangement
number. (A1-C3 : Refer to the following)
4
5MULTI DISPLAY Setup
MULTI DISPLAY Setup
Ratio On
2 2
Location A1
A1 A2
B1 B2
A1 A2 A3
B1 B2 B3
C1 C2 C3
Display Number locations for each arrangement
Setup for MULTI DISPLAY
6R
Press twice to exit from Setup.
Notes:
(1) For PC or RGB input signals, normal multi-display magnification is only available at the VGA resolution.
(2) The multi-display capability is not functional for component signals.
(3) The MultiDisplay (multiskærmdisplay) function does not display certain input signals from the terminals of the
installed option boards listed below:
• Component input signals from the scart and RCA terminals of scart terminal board (TY-37TM5TB or TY-42TM5TB)