Setup for Input Signals | |||
Colour system / Panasonic Auto |
|
|
|
Select Signal from the “Setup” menu during AV(S Video) input | Setup |
|
|
signal mode.(“Signal [AV]” menu is displayed.) |
|
| |
| |||
| RGB | ||
|
|
| |
Press to select the “Colour System” or “Panasonic |
| Signal |
|
| Screensaver |
| |
Auto”. |
| English (UK) | |
OSD Language |
| ||
|
| ||
Press to select each functions. | MULTI DISPLAY Setup | ||
| Set up TIMER |
| |
|
|
| |
| Press | (ACTION) button | |
If the picture image becomes unstable: | Signal |
| [ AV ] |
With the system set on Auto, under conditions of |
| ||
|
|
| |
low level or noisy input signals the image may in | 3D Y/C Filter (NTSC) | On | |
rare cases become unstable. Should this occur, set | Colour system |
| Auto |
the system to match the format of the input signal. | 3:2 Pulldown | (4:3) | Off |
| Panasonic Auto | 4 : 3 | |
| Mode |
|
| Function |
|
|
|
|
|
|
| ||||
| Colour system | Set the colour system to match the input signal. If set to “Auto”, the colour system is determined |
| ||||
|
| automatically. |
|
|
|
|
|
|
| Auto | PAL | SECAM | M.NTSC | NTSC |
|
|
|
|
| ||||
| Panasonic Auto | Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto is |
| ||||
| (4:3) | selected. If you would like to view 4:3 images in “Just” format, set to “Just”. |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3:2 Pulldown
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are | |||
recorded at 24 frames per second. |
|
| |
If the picture is not stable, turn the setting to off. | Setup |
| |
|
| ||
Select “Signal” from the “Setup” menu during AV(S Video) or Component | |||
input signal mode.(“Signal [AV]” menu is displayed.) | |||
| RGB | ||
|
| Signal | |
Press to select 3:2 Pulldown. |
| Screensaver | |
| OSD Language | English (UK) | |
| MULTI DISPLAY Setup | ||
Press to set On/Off. |
| Set up TIMER | |
| Press | (ACTION) button | |
Note:
When On, this setting only affects the following signal input.
•NTSC signal input during “AV(S Video)” input signal mode.
•525i(480i) signal input during “Component” input signal mode.
R
Press to exit from adjust mode.
Signal |
| [ AV ] | |
3D Y/C Filter (NTSC) |
| On |
|
Colour system |
| Auto |
|
3:2 Pulldown |
| Off |
|
Panasonic Auto (4:3) |
| 4 : 3 |
|
Signal | [ | Component | ] |
3:2 Pulldown |
| Off |
|
33
