Safety Precautions / Maintenance

WARNING

Setup

Do not place the Plasma Display on sloped or unstable surfaces.

• The Plasma Display may fall off or tip over.

Do not place any objects on top of the Plasma Display.

•If water spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma Display, please consult an Authorized Service Center.

Do not cover the ventilation holes.

•Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.

If using the pedestal (optional accessory), leave a space of 3 15/16” (10 cm) or more at the top, left and right, 2 3/8” (6 cm) or more at the bottom, and 2 3/4” (7 cm) or more at the rear. If using some other setting-up method, leave a space of 3 15/16” (10 cm) or more at the top, bottom, left and right, and 2 3/4” (7 cm) or more at the rear.

AC Power Supply Cord

The Plasma Display is designed to operate on 120 V AC, 50/60 Hz (TH-42PS9UK, TH-37PH9UK, TH-42PH9UK, TH- 50PH9UK) or on 110 - 127 V AC, 50/60 Hz (TH-42PS9XK, TH-42PH9XK, TH-50PH9XK).

Securely insert the power cord plug as far as it will go.

•If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.

Do not handle the power cord plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable.

•Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center.

If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma Display, unplug the power cord immediately.

•Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Have the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are strongly discouraged due to its high voltage dangerous nature.

If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately.

•A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

•If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

•Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

•If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

•Do not allow any detergent to come into direct contact with the surface of the Plasma Display. If water droplets get inside the unit, operating problems may result.

•Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

7

Page 6 Page 8
Page 7
Image 7
Panasonic TH-42PH9XK, TH-50PH9XK, TH-50PH9UK manual Maintenance, Setup, AC Power Supply Cord, If problems occur during use
Page 6 Page 8

TH-50PH9XK, TH-42PH9XK, TH-50PH9UK, TH-42PS9XK specifications

The Panasonic TH-42PS9XK, TH-50PH9UK, TH-42PH9XK, and TH-50PH9XK are prominent plasma TV models that signify Panasonic’s commitment to delivering high-quality viewing experiences. With their unique features and technologies, these models cater to a variety of home entertainment needs.

Starting with the TH-42PS9XK, this 42-inch plasma display boasts an impressive resolution of 1024 x 768 pixels, delivering vibrant colors and deep contrasts. It incorporates Panasonic's Real Black Drive technology, which enhances the black levels for richer images. The TV also features VIERA Image Viewer, allowing users to access and view images directly from USB devices, enhancing the sharing experience.

The TH-50PH9UK and TH-50PH9XK are 50-inch models that offer similar benefits but with some additional enhancements. Both TVs feature a high-definition resolution of 1366 x 768 pixels, providing a larger canvas for high-quality visuals. The TH-50PH9UK, designed for professional use, supports multiple input options, including DVI-D and VGA, making it suitable for presentations and public displays. It features a dynamic contrast ratio that adjusts the contrast automatically, ensuring optimal image clarity in varying lighting conditions.

On the other hand, the TH-50PH9XK emphasizes internet connectivity, enabling access to streaming services and apps. It features multiple HDMI ports, facilitating easy connectivity with various entertainment devices like gaming consoles and Blu-ray players. Both 50-inch models utilize the Advanced Continuous Clear Drive technology, which minimizes motion blur, making them ideal for fast-paced content like sports and action movies.

All four models utilize Panasonic's NeoPDP technology, which enhances energy efficiency while still providing stunning picture quality. The improved phosphor technology allows for better color reproduction and increased brightness, making them ideal for both bright and dimly lit rooms.

In summary, the Panasonic TH-42PS9XK, TH-50PH9UK, TH-42PH9XK, and TH-50PH9XK reflect Panasonic's focus on quality and innovation. With various screen sizes and a range of advanced features, these models are suitable for consumers seeking reliable performance and superior visual experiences in their home entertainment systems. Their combination of deep contrast, vibrant colors, and versatile connectivity options ensure that they cater to any viewing preference, positioning them among the popular choices for plasma televisions in their market segment.
Top Page Image Contents