Avery 256, 204 Regular maintenance, Removing paper debris, Renewal of the dust filter liner ALS

CONTENTS

5.1MAINTENANCE AND CLEANING

5.1.3Regular maintenance

ALS 20x 256

GB

The label dispenser is designed to be maintenance-free. However, you should service the unit regularly in order to ensure reliable long-term operating results.

Depending on operating conditions, you should perform the following at least once a week:

Carry out the cleaning and maintenance work described below.

Removing paper debris

Wipe the paper residue from the rollers and edges. Clean the sensor lenses with a soft brush or cloth.

Renewal of the dust filter liner (ALS 256)

CAUTION!

An exhausted filter liner can cause the machine to overheat and to break down.

Replace the filter liner regularly, at least in monthly intervals.

In case of overheating the machine, the error message „5026 MotorProtect CPU“ appears, see “List of error messages” on page 50.

Screw out the four thumb screws [51A]. Remove the filter cover [51B].

Replace filter liner (article no. A8697).

Assemble the filter cover and fix it using the thumb screws.

B

A A

AA

[51]Dust filter at an ALS 256. A Thumb screws

B Filter cover

49