CONTENTS
1.2SAFETY INSTRUCTIONS
1.2.2Operational safety of the unit
Proper usage
The ALS 20x Label Dispenser is a fully automatic unit for attaching
WARNING!
Improper usage of the unit can cause accidents, property damage and production downtime!
Only use the unit in accordance with the instructions specified in this manual. Do not operate the unit without the required safeguards.
Only configure the unit in accordance with this manual and with the required care.
Only use original accessories. Do not make any modifications or alterations to the unit.
Repairs to the device may only be performed by authorised specialists who are aware of the risks involved.
Protection against injuries by electrical current
WARNING!
The machine operates using mains voltage! Touching live electrical parts may expose you to hazardous electrical currents and may lead to burns.
Only operate the unit once the housing has been reassembled properly.
Only connect the unit to a properly fitted power socket that is grounded.
Before cleaning, switch off the unit and remove the power cable from the socket. Only link the unit to devices that fulfil the SELV (safety
ALS 20x 256
GB
WARNING
The unit is not protected against splashing water in its standard model.
Keep the unit dry.
If liquids have penetrated the unit, switch it off and disconnect or unplug the power cable immediately. Inform a service technician.
WARNING
The device is only completely disconnected from the mains if the power cable is unplugged.
Make sure the power supply socket is accessible.
In case of emergency, switch off the device and disconnect the power cable.
CAUTION
A too high or low supply voltage can damage the unit.
Only operate the device using the system voltage indicated on the nameplate. Ensure that the mains voltage set on the unit is the same voltage as that provided by the electricity supplier.
4
