CONTENTS
2.2OPTIONS
ALS 20x 256
GB
Outer Diameter control sensor
The outer diameter control sensor (OD sensor) triggers a warning, if the label roll outer diameter falls below a certain, adjustable value.
Printer
–If necessary, you can mount a hot stamp printer (not available from Avery Dennison) onto the holder brackets of the dispensing edge.
–Example of use: Printing consecutive numbers onto labels.
Applicator
If it is not possible to label directly from the dispensing edge, you can fit an applicator to the label dispenser. Various types of applicators are available that depend on the given requirements.
Simple applicators can be controlled directly via the PLC signal interface [5G] that is available as standard.
Applicator interface
Additional board [5H]; allows almost all types of applicators to be controlled.
Dust/Splash guard
Available only for ALS 20X.
Additional sealing of the electrical connections and of the housing fulfils the requirements of the IP65 protection class [19].
[18] OD sensor (pictured red resp. dark gray)
[19]Dust/splash guard of the electrical connections (pictured red resp. dark gray)
20
