CONTENTS
3.2INSERTING LABEL MATERIAL
Threading the label roll onto the drive roller
Open the pressure roller. To do so, rotate the lever [37D] in a clockwise direction.
Feed the backing paper around the deflection roller [37B], drive roller [37C] and the dancer arm [37A]. Close the pressure roller. To do so, rotate the lever until it snaps in noticeably.
ALS 20x 256
GB
AB
C
D
[37] Open the pressure roller.
Fastening the label roll to the rewinder
Clamp the backing paper to the rewinder as shown and tighten it [39].
Manually rotate the rewinder by one turn.
[38] Close the pressure roller.
[39] Fastening the backing paper to the rewinder.
36
