CONTENTS
6.1ERROR MESSAGES
ALS 20x 256
GB
Status Status text | Cause | Action to take |
5147 Tandemsynch. Init | This message can only appear |
| during tandem operation. |
–Communication between the master and slave machines is not function- ing.
Check tandem interface cable.
–Is it a) in place and b) correctly con- nected?
Check the settings on both ma- chines.
–Siehe “Setting up tandem operation” auf Seite 112.
5200 | Home position |
| This message may appear when |
|
|
| |||
|
|
| operating the applicator. The ap- |
|
|
|
| plicator did not reach its home |
|
|
|
| position (upper end position) | Remove any obstructions |
|
|
| within the intended | |
|
| – The applicator is stuck | Check compressed air connection | |
|
| and reconnect correctly if necessary | ||
|
| – Compressed air applicator: Com- | ||
|
| Check cable and connect correctly if | ||
|
| pressed air supply interrupted or | ||
|
| necessary. | ||
|
| switched off | ||
|
|
| ||
|
| – Cable not correctly connected. |
| |
|
|
|
|
|
5201 | Touch Down | The applicator lower end position |
| |
|
| (Touch Down) was not reached in time. |
| |
|
|
|
|
|
6002 | New prog. vers. | New firmware has been loaded. This is a | Press the Online button to confirm. | |
|
| message from the labeller that new | – All parameters are reset to their fac- | |
|
| firmware is available. | tory settings. | |
|
|
|
|
|
6031 | New Parameters | New firmware was loaded with the result | No action necessary. The message | |
|
| that new functions have been added to | ||
|
| is for information only. | ||
|
| the menu. | ||
|
|
| ||
|
|
|
|
|
6207 | No file card | No compact flash card was found. | Check whether a compact flash card | |
|
|
|
| is connected. If the compact flash |
|
|
|
| card was not connected until after the |
machine was switched on: Switch the machine off and back on again.
9022 No network link | This status message can only appear |
| when Ethernet address assignment is |
| set to DHCP (INTERFACE PARA > |
| NETWORK PARAM.> IP Addressassign). The |
| cause is almost invariably an incorrectly |
|
Check whether the network connec- tor is plugged in correctly, correct if necessary.
[53] List of error messages
52
