Panasonic TH-58PF11UK Basic Controls, Remote Control Transmitter, Standby ON / OFF button, On Off

Basic Controls

Remote Control Transmitter

R button (see page 23)

Press the R button to return to previous menu screen.

Standby (ON / OFF) button

The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode.

Status button

Press the “Status” button to display the current system status.

1Input label

2Aspect mode (see page 18)

3 Off timer

The off timer indicator is displayed only when the off timer has been set.

4 Clock display (see page 46)

N button

(see page 25, 26, 27, 28)

POSITION buttons

ACTION button

Press to make selections.

POS. /SIZE button

(see page 24)

PICTURE button

(see page 26)

INPUT button

Press to select INPUT1, INPUT2, INPUT3 and PC input SLOTS sequentially. (see page 15)

When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B)

Sound mute On / Off

Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed.

Numeric buttons

(see page 35)

ASPECT button

Press to adjust the aspect. (see page 18)

SURROUND button

The surround setting switches on and off each time the SURROUND button is pressed. The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema.

Note:

The surround settings are memorized separately for each AUDIO MENU (STANDARD, DYNAMIC, CLEAR).

ON OFF

SURROUND ON

	PC	1
	4:3	2
4	10:00
	OFF TIMER 90	3

SET UP button (see page 23)

SOUND button (see page 28)

DIRECT INPUT buttons

Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode. (see page 15)

This button is used to switch directly to INPUT mode.

Channel Adjustment

This button cannot be used for this model.

Volume Adjustment

Press the Volume Up “+” or Down “–” button to increase or decrease the sound volume level.

OFF TIMER button

The Plasma Display can be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

30 60 90

0

When three minutes remain, “OFF TIMER 3” will flash.

The off timer is cancelled if a power interruption occurs.

Remote ID lock (see page 35)

Digital Zoom (see page 22)

MULTI Window buttons (see page 20)

17