Panasonic TH-65PF11UK manual Multi Pip Setup, Display Mode, Sub Screen Insertion During BLEND PIP

For “PIP”:

MULTI PIP SETUP

Set the two-screen display function that is activated when is pressed.

1 Press to display the SET UP menu.

2 Press to select the MULTI PIP SETUP.

Press to display the “MULTI PIP SETUP” menu.

3	Press to select the menu to adjust.
	Press to adjust the menu.

SET UP	2/2
MULTI DISPLAY SETUP
MULTI PIP SETUP
PORTRAIT SETUP
SET UP TIMER
MULTI PIP SETUP
MULTI PIP		PIP
DISPLAY MODE		—
TRANSPARENCY	OFF
TRANSPARENCY LEVEL	0 %
INSERT	OFF
INSERT LEVEL	1

MULTI PIP

Set the two-screen function.

PIP ADVANCED PIP BLEND PIP

DISPLAY MODE

The display mode can be changed separately for each function that was set in “MULTI PIP SETUP”.

— (One screen) P AND P P OUT P P IN P

For “ADVANCED PIP”:		— (One screen)		1 to 8
For “BLEND PIP”:	— (One screen)		FULL		P IN P

Note: The display mode changes in the same way when is pressed.

Transparent Display of the Sub Screen (During BLEND PIP)

1Select “ON” in “TRANSPARENCY”.

2Set the transparency level for the sub screen in “TRANSPARENCY LEVEL”. (0 to 100 %) Setting example Transparent image (sub screen)

0 %: No transparency 100 %: Fully transparent

Note: “INSERT” cannot be set when “TRANSPARENCY” is “ON”.

Sub Screen Insertion (During BLEND PIP)

1Select “ON” in “INSERT”.

2Set the “INSERT LEVEL”. (1 to 10 %)

Set the brightness level threshold for discriminating between the transparent areas and non-transparent areas on the sub screen.

Setting example Image to insert (sub screen)	INSERT LEVEL
	10 %	Only the areas on the overlay
		image that are brighter than
		the “INSERT LEVEL” are
		displayed on the background
Background image		image.
		Two-picture insertion
(main screen)

1 %

Note: “TRANSPARENCY” cannot be set when “INSERT” is “ON”.

36