Caution

This appliance is intended for use in tropical climates

When cleaning the TV, remove the mains plug

Cleaning an energized TV may cause electrical shock.

When the TV is not going to be used for a long period of time, remove the mains plug

This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.

Allow sufficient space around the TV for radiated heat

When using the pedestal, keep a space between the bottom of the TV and the surface where the TV is set.

In case of using Wall-hanging bracket, follow the manual of it.

10

10

10

10

 

 

 

 

 

(cm)

Minimum distance

Do not block the rear air vents

Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electrical shock.

Do not apply strong force or impact to the display panel

This may cause damage resulting in injury.

Do not expose your ears to excessive volume from the headphones

Irreversible damage can be caused.

Notes

Auto power standby function

If no signal is received and no operation is performed for 30 minutes, the TV will automatically go to standby mode.

Keep the TV away from these types of equipment

Electronic equipment

In particular, do not place video equipment near the TV. Electromagnetic interference may distort images / sound.

Equipment with an infrared sensor

This TV also emits infrared rays. This may affect operation of other equipment.

Transport only in upright position

Adjust the LCD panel to your desired angle

Set the mark at the centre as illustrated, to have the swivel positioned at the centre of the rotation angle.

296 mm

15°

15°

399 mm

 

[View from the top]

Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.

Do not place any objects or hands within the full rotation range.

5

TH-L37X2S&20KMRTX_EN.indd 5

3/18/2010 5:27:09 PM

Page 5
Image 5
Panasonic TH-L37X2S TH-L37X20K, TH-L37X20T, TH-L37X20X, TH-L37X20M, TH-L37X20R Adjust the LCD panel to your desired angle