Control with HDMI “HDAVI Control”
Recommended HDMI Connections
Follow the connection diagrams below for HDMI control
of a single AV equipment such as a Panasonic
Refer to page 18 for Setup Menu settings and additional control information.
Optional HDMI and/or optical cables are not provided.
If connection (or setting) of equipment compatible with HDMI control is changed, switch the power of this unit Off then On again while the power of all equipment is On (to this unit to correctly recognize the connected equipment) and check that DIGA, RAM theater and Player theater playback operates.
■Connecting this unit to a DVD recorder, RAM theater or Player theater
| For DIGA : |
| •Connect with HDMI cable |
Back of the unit | For RAM theater and Player theater : |
| •Connect with HDMI cable and audio |
| cable. |
| Connect the TV’s PROG. OUT audio |
| (L&R) to listen to the TV program |
| through the theater system. |
HDMI cable | Audio Cable |
HDMI | HDMI | Audio | HDMI | Audio |
(AV OUT) | (AV OUT) | IN | (AV OUT) | IN |
or |
|
| or |
|
DIGA | Panasonic RAM theater |
| Panasonic Player theater | |
(Panasonic DVD Recorder) |
|
|
|
|
■Setting of this unit after connection
After making connections as shown above, set “Ctrl with HDMI” (under “Other adjust”) to “On” using the Setup menu. (p. 18).
Note
•Individual HDMI equipments may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
20
