Attaching the pedestal to the plasma television
Caution
Do not use any television or displays other than those supplied in the package.
•Otherwise the unit may fall over and become damaged, and personal injury may result.
•If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.Do not use the pedestal if it becomes warped or physically damaged.
•If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the plasma television, and it might fall over and become damaged, and personal injury may result.During
•If the unit is knocked or children climb onto the pedestal with the Plasma TV installed, the plasma television may fall over and personal injury may result.Use the accessory
•If two people are not present, the television may be dropped, and personal injury may result.Two people are required to install and remove the television.
Accessories for pedestal assembly
A Assembly screw (4) | B Assembly screw (4) | C Pole (2) | D Base (1) |
| (Black screw) |
|
|
M5 x 20 | M5 x 30 |
|
|
Accessories for pedestal security |
|
| |
1 Band (2) | 2 Screw (2) | 3 Wood screw (2) | 4 Clamp (2) |
M4 x 10
Quick Start Guide Accessories/Options
1 Assembling the pedestal
1. Installing the poles
For 42˝ Plasma television (Outside)
2. Securing the poles
Front
Insert the poles C into the left and right holes in the underside of the base D so that they fit securely as shown in the illustration above.
Use the assembly screws A to secure the poles firmly to the bottom of the base.
Note
Forcing the assembly screws the wrong way will strip the threads.
7
