Accessories / Options
7

Attaching the pedestal

Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise the TV or the display may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will
not be strong enough to support the TV, and it might fall over and become damaged, and personal
injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and
personal injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4) (silver) Base
M5 × 20 (mm)
TBL5ZX0051
(
TH-P42U30D
TH-P42U30K
TH-P42U30M
TH-P42U30P
TH-P42U30Q
TH-P42U30T
TH-P42U30V
)
TBL5ZX0053
(
TH-P46U30M
TH-P46U30P
TH-P46U30V
TH-P50U30D
TH-P50U30K
TH-P50U30M
TH-P50U30P
TH-P50U30Q
TH-P50U30T
TH-P50U30V
)
Assembly screw (4) (black)
M5 × 25 (mm)
Pole
TBL5ZA3035
Assembling the pedestal
Use the assembly screws to
fasten the pole to the
base securely.
Make sure that the screws are
securely tightened.
Forcing the assembly screws the
wrong way will strip the threads.
Securing the TV
Insert the pole into the TV, and then fasten securely with the
assembly screws .
Tighten the four assembly screws loosely at first, then tighten
them firmly to fix securely.
Carry out the work on a horizontal and level surface.
A
DC
Front
D
B
Hole for
pedestal
installation
(View from the bottom)
Arrow mark