Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Rear of the TV | Aerial |
Satellite dish
Set top box
Mains lead (supplied) | Fully wired HDMI |
| |
Mains Lead | compliant cable |
|
Basic Connection
Push until both | Make sure that |
the mains lead is | |
side tabs click | securely fixed. |
•To remove from the TV:
tabs
Press both tabs and pull on mains connector to release
AC 220 - 240 V, 50 / 60 Hz
RF cable
Note
•Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
•Do not place the RF cable under the TV.
•To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the correct terminating plug are required.
•If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial socket and the TV.
•Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your particular area and the accessories required.
•Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the Customer.
•VIERA Link connection 
(p. 51)
•Other equipment connection 
(p. 56 - 58)
•Read the manual of the equipment, too.
9
