How to Use the Menu Functions
23
Screen Display
• Off
• On
Turns the screen off when you select [Off]
•
The sound is active even if the screen turns off.
•
Press any buttons (except Standby) to turn the screen on.
•
This function is effective in reducing power consumption when listening
to the sound without watching the TV screen.
Advanced Settings
White Balance∗1
R-Gain Adjusts the white balance of bright red area
G-Gain Adjusts the white balance of bright green area
B-Gain Adjusts the white balance of bright blue area
R-Cutoff Adjusts the white balance of dark red area
G-Cutoff Adjusts the white balance of dark green area
B-Cutoff Adjusts the white balance of dark blue area
Reset to
Defaults Press the OK button to reset to the default White Balance
Gamma∗1
Gamma
• S Curve /
1.8 / 2.0 / 2.2
/ 2.4 / 2.6
Switches the gamma curve
•
Please note the numerical values are reference for the adjustment.
Reset to
Defaults Press the OK button to reset to the default Gamma
Refresh Rate
• 50 Hz
• 100 Hz
Changes the image processing of the panel
(depending on the input signal)
•
Set to [100Hz] normally
Resolution
Enhancer
• Off
• Mid
• Max
Enhance the picture resolution to make the image sharper
•
You can set this function for each input.
•
Not valid on Media Player
Side Panel
• Off
• Low
• Mid
• High
Increases the brightness of the side panel
•
The recommended setting is [High] to prevent panel “image retention”.
16:9 Overscan
• Off
• On
[On] : Default - Image is overscanned by ~5% beyond the edge of the
screen to hide edge video noise
[Off] : Displays image in its original size including edge video noise such
as lines, dashes, dots etc.
•
Applicable for video signals when TV aspect is set to [16:9]
•
Memorised separately for SD and HD channels / signals
DVI Input Setting
• Normal
• Full
Changes the black level in the image for HDMI input mode with DVI input
signal manually
•
When the DVI input signal from the external equipment, especially from PC,
is displayed, the black level may not be suitable. In this case, select [Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only.
Pixel Orbiter
• Auto
• On
Selects the mode for wobbling of the image to prevent panel “image
retention”
[Auto]: Automatically works only for the appropriate images and you
rarely recognise the wobbling.
Scrolling Bar
Scrolls the vertical bar to prevent panel “image retention”
•
Press the OK button to start scrolling and press any buttons (except
Standby) to exit this mode.
Reset to Defaults Press the OK button to reset settings of Picture Viewing Mode to the
default.
∗1 : PC input mode only