Panasonic TH-P42U30P, TQB4TC0043-1, TH-P50U30T, TH-P50U30D, TH-P46U30V, TH-P50U30P Network Other

HDMI

Network

Other

Problem	Actions
	•Set the sound setting of the connected equipment to “2ch L.PCM”.
Sound is unusual	•Check the [HDMI1 / 2 / 3 Input] setting in the Sound Menu. (p. 25)
	•If digital sound connection has a problem, select analogue sound
	connection. (p. 61)
Pictures from external	•Check the HDMI cable is connected properly.			(p. 51, 56 - 58)
equipment are unusual	•Turn the TV and equipment Off, then turn them On again.
when the equipment is	•Check an input signal from the equipment.			(p. 62)
connected via HDMI	•Use equipment compliant with EIA/CEA-861/861D.
	•Check the LAN cable or Wireless LAN Adaptor is connected properly.
Cannot connect to the	(p. 43)		(p. 43 - 46)
	•Check the connections and settings.
network	•Check the network equipment and network environment.
	•If the problem persists, consult your Internet Service Provider or
	telecommunications company.
Cannot select the	•Is the media server prepared?	(p. 42)
file during DLNA
operations	•Check applicable data format.	(p. 63 - 64)
Cannot access the	•Check the connections and settings.		(p. 43 - 46)
Internet contents	•The server or connected line might be busy now.
The TV goes into	•Auto power standby function is activated.
Standby mode	•The TV enters Standby mode about 30 minutes after analogue
	broadcasting ends.
	•Are the batteries installed correctly?		(p. 6)
The remote control	•Has the TV been switched On?
does not work or is	•Point the remote control directly at the front of the TV (within about
intermittent	7 m and a 30 degree angle of the front of the TV).
	•Situate the TV away from sunshine or other sources of bright light not
	to shine on the TV’s remote control signal receiver.
Parts of the TV become	•Even when the temperature of parts of the front, top and rear panels
hot	has risen, these temperature rises will not pose any problems in
	terms of performance or quality.

Frequently Asked Questions

69