10
Quick start Guide
Prog. Position All channels No CH5
No CH5 / S4C
No CH4 / CH5 No S4C
No CH4 / S4C
No CH4 / S4C / CH5
1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1
2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2
3 ITV ITV ITV ITV ITV ITV ITV
4 CH4 CH4 CH4 S4C CH4 CH5 SAT
5 S4C S4C SAT SAT CH5 SAT °
6 CH5 SAT °°SAT °°
7SAT
°°°°°°
Note:
° The next available channel will appear, if no other stations are available then the Programme position will
remain unused.

5. TV to VCR download

If a Q-Link, NEXTVIEWLINK or compatible VCR has been connected to the
AV2 socket before starting Step 1, programme information will be downloaded
to the VCR.
Downloaded tuning data will match the television’s.
Not all VCRs support this download of programme information, some may
require to be started manually. Refer to the VCR operating instruction book.
If a VCR other than those described above has been connected, then there will
be no download operation.
Notes:
If the VCR has not accepted download data from the TV, you may need to select the Download option from the
VCR’s menu system.
Refer to the VCR operating instruction book.
If Q-Link is not operating correctly, check the following:
• The Scart cable is connected to the TV’s AV2 Scart socket.
• The Scart cable is connected to the VCR’s compatible (Q-Link, NEXTVIEWLINK or similar technology) Scart
socket.
• The Scart cable is a “fully wired” type.
For further information on Q-Link and connecting equipment, see pages 13, 30 and 36.
• The sorted programme order depends upon the TV signal, the broadcasting system, and reception conditions.
If the order is not to your preference it can be rearranged. Refer to the Programme edit menu - see page 22 for
details.
• If you have an analogue satellite receiver, select ‘SKY ONE’ or ‘SKY NEWS’ on the receiver before starting
Auto Setup.
After Auto Setup is complete, the satellite position will be shown as ‘SAT’ in the channel listing to denote
programmes from the satellite receiver.
• If you have a digital satellite receiver, you can start Auto setup with the receiver set to any channel. You will
then have to manually name the ‘SAT’ position after Auto setup is complete. Refer to the Programme edit menu
- see page 23 for details.
TV −> VCR DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable