8
Quick start Guide
4. Q-Link connection of TV, VCR and Satellite using Scart and RF cables
For Q-Link to function correctly the TV, VCR
and Satellite Receiver must be connected as
shown in the diagram below.
RF connections
• Connect an RF cable to the Aerial In socket
of the Satellite Receiver.
• Connect an RF cable from the RF Out
socket of the Satellite Receiver to the RF In
socket of the VCR.
• Connect an RF cable from the RF Out socket
to the VCR of the TV Aerial In socket ( ).
Scart connections
‘Fully wired’ Scart Cables should be used for
all of the Scart connections.
• The AV2 Scart of the VCR must be
connected to the VCR socket of the Satellite
Receiver.
• The TV Scart socket of the Satellite
Receiver must be connected to the AV1
Scart socket of the TV.
Note:
If using a “Q-Link” VCR then the AV1 Scart
of the VCR must be connected to the AV2
socket of the TV. If your VCR is not a “Q-
Link” VCR, please consult your VCR
operating instruction book.
Notes:
• Additional equipment and cables are not
supplied.
• Further details of audio/ video connections
can be found on pages 36 and 37.
• Further information for VCR and Satellite
Receiver installation with this TV can be
found on page 31.
Aerial
(Not Supplied)
LCD TV
Aerial
Output
socket
Aerial
Input
socket
Aerial Input
socket
VCR
Satellite
Receiver
TV
Scart
socket
VCR
Scart
socket
AV2
Scart
socket
AV1
Scart
socket
Aerial
Output
socket
Aerial Input socket
AV1
Scart socket AV2
Scart socket