7
Quick start Guide
3. Q-Link connection of TV and VCR using Scart and RF cables
RF connection
Connect the AERIAL to the Aerial in socket of the
VCR and on RF cable from the VCR Aerial Out
socket to the TV Aerial socket ( ).
Scart connection
The VCR must be connected to the AV2 Scart
socket of this TV using a ‘fully wired’ Scart cable.
Note:
If using a “Q-Link” VCR then the AV1 Scart of the
VCR must be connected to the AV2 socket of the
TV. If your VCR is not a “Q-Link” VCR, please
consult your VCR operating instruction book.
Notes:
• Additional equipment and cables are not
supplied.
• Further details of audio/ video connections can
be found on page 36 and 37.
• Further information for VCR and Satellite
Receiver installation with this TV can be found
on page 31.
Aerial Input socket
Aerial
(Not Supplied)
LCD TV
Aerial Lead
Aerial
Output
socket
Aerial
Input
socket
AV1
Scart socket
AV2
Scart socket
VCR
RF connection
Connect the AERIAL to the Aerial in socket of the
VCR and an RF cable from the VCR Aerial Out
socket to the TV Aerial socket ( ).
Scart Connections
The VCR can also be connected to the TV using
a Scart cable if you are using a Scart equipped
VCR.
• Use the TV’s AV1 Scart socket for a VCR.
• Use the TV’s AV2S Scart socket for an S-Video
VCR.
Notes:
• Additional equipment and cables are not
supplied.
• Further details of audio / video connections can
be found on pages 36 and 37.
2. Connection of TV and VCR using Scart and RF cables
VCR
Aerial Input socket
Aerial
(Not Supplied)
LCD TV
Aerial Lead
Aerial
Output
socket
Aerial
Input
socket
AV1
Scart socket
AV1,AV2
Scart sockets