Once the equipment is connected, use the following procedure to view the input. (For connection, see “External Equipment” on page 23.)
Display the input select menuSelect the input mode connected to the equipment
View |
|
|
To return to TV | Displays the |
|
| ||
| selected mode |
Note
If the external equipment has an aspect adjustment function for a connected TV, set to “16:9”.
You can also select the connector using the AV button on the remote control or side panel of the TV.
Set the VCR / DVD switch to the appropriate position
Press and hold during the following operations
Enter the appropriate code for the equipment to be controlled, see table below.
“VCR” position |
|
| |
Equipment | Code |
| |
VCR | 10 (default) |
| |
DVD | 11 |
| |
“DVD” position |
| Press | |
Equipment | Code | ||
| |||
DVD | 70 (default) |
| |
Home Player | 71 |
| |
theatre |
| ||
|
|
Note
Confirm correct operation after the code changed.
The codes will be reset to default values if batteries are replaced.
“DVD” means DVD player, DVD recorders and home theatre recorders.
Some operations may not be possible on some equipment models.
Select VCR to operate Panasonic VCR or DVD
Select DVD to operate Panasonic DVD or Home Player theatre
Standby mode / Turn on
Playback video cassette / DVD
Stop the operations
VCR : Rewind, review the picture rapidly in reverse
DVD : Play at slow speed Press and hold to search backward
VCR :
DVD : Play at slow speed
Press and hold to search forward
Pause / Restart
VCR : Select programme
DVD : Skip the track or title
Start recording
10