External Equipment (continued)
Note
You can control the theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver).
This function is available with Amplifier or Player theatre which has “HDAVI Control” function.
If you cannot operate, check the “VIERA Link” setting in “Setup menu” (page 19) and the equipment.
1 Display “VIERA Link menu”
2 Select “Speaker Selection”3 Set to “Home Cinema” or “TV” L Home CinemaAmplifier or Player theatre will be automatically turned on if it is in Standby mode and sound will be output from the theatre speakers connected to the equipment.
Volume up / down 
Mute 
The sound of TV speakers is mute.
When the equipment is turned off, TV speakers will be active.
TV speakers are active.
This function may not work properly depending on the connected equipment.
Image or sound may not be available for the first few seconds when playback starts or input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
Easy playback is also available when using the remote control for Amplifier or Player theatre. Read the manual of the equipment.
About HDMI cable for connecting Panasonic HD Video Camera, read the manual of the equipment.
If more than one equipment of the same type are connected to the TV by HDMI cables, for example two DIGA Recorders to HDMI1 and HDMI2, VIERA Link will only be available for the lower terminal number, in this case HDMI1.
“HDAVI Control 3” is the latest standard (current as of December, 2007) for HDAVI Control compatible equipment. This standard is compatible with conventional HDAVI equipment.
22