Panasonic TX-26LE8A Menu, Item, Setup, Setup, Picture, Settings, Select “PC”, To return to TV, PC menu setting, (2.0 / 2.2 / 2.5), Select the external input

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected. To connect PC (page 23)

	Select the external input
	Select “PC”
	Blue
	Red
To return to TV	Corresponding signals
	(page 27)
	(Corresponds to the
	colour bar on screen)

PC menu setting (changed as desired)

To make settings “How to Use Menu Functions” to (page 13)

Menu

Picture

Setup

Item			Adjustment / Configurations (options)
	R-Gain	Adjusts the white balance for red areas
Advanced	G-Gain		Adjusts the white balance for green areas
	B-Gain	Adjusts the white balance for blue areas
PC
	Gamma	(2.0 / 2.2 / 2.5)
Settings
	Reset to		Press the OK button to reset to the default setting.
	Default
			Switches to a wide view
			VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
	Input		SVGA (800 × 600 pixels), XGA (1,024 × 768 pixels),
			WXGA (1,366 × 768 pixels)
	Resolution
			Options change depending on signals
			If “H-freq.” or “V-freq.” is shown in red, the signals may not be
			supported.
	Clock	Set to the minimum level if noise occurs
			Adjusts horizontal position
	H-pos
PC
Setup
			Adjusts vertical position
	V-pos
	Clock		Eliminates flicker and distortion
			Adjust after Clock adjustment
	Phase
			Set to the minimum level if noise occurs
	Reset to		Press the OK button to reset to the default setting.
	Default

18