The current channel settings can be changed according to your needs and reception conditions.
To freely change settings after Auto setup
1Select the programme number and search through the channelProgramme number | select programme | 2 Store 3 Repeat 1 - 2 |
|
1 CH 2
Manual tuning
| search | If a VCR is | |
|
| ||
|
| connected with | |
|
| only the RF cable, | |
Channel | The programme | select programme | |
number blinks | number “0”. | ||
|
1 
(Press until “Tuning mode” appears)
2 
or 
(Access Tuning menu)
3 
(Press until “Manual tuning” is reached)
4 
or 
(Access Manual tuning)
5 
(Programme, Channel (select), Sound system)
6 
or 
(Change programme or start searching channels)
7 
(Store)
8 5 - 7 (Repeat)
To return to TV
10
CH10
4. 5MHz
Manual tuning
: Search | |||||
| TV / AV | : Move cursor | |||
| STR | : To | store | ||
| F | : To | exit | ||
|
|
|
|
|
|
| Edit | Allows you to change the sound system used for a programme channel. | |||
| (4.5MHz / 5.5MHz / 6.0MHz / 6.5MHz) |
| |||
|
|
|
|
| |
| Sound system |
| Select the channel you want to adjust | Set this function | |
|
|
|
| ||
|
|
|
|
| |
|
|
|
| Lets you select the correct transmission standard for the transmission signal being | |
| Edit | received (Auto / PAL / SECAM / NTSC 4.43 / NTSC 3.58) | |||
|
|
| Select the channel you want to adjust | Set this function | |
| Colour system |
| |||
|
|
|
| Normally, select “Auto” |
|
|
|
|
|
| |
|
|
|
| For the small adjustments to the tuning of an individual channel (useful for | |
| Small adjustment | example when weather conditions are affecting reception quality of a programme) | |||
|
|
| Select the channel you want to adjust | Set this function | |
| Fine tuning |
|
| ||
|
|
|
| To cancel Fine tuning, tune again by Manual tuning | |
|
|
| |||
| Skip the | For skipping the programme numbers on which no TV stations are tuned | |||
| programme | Select the programme numbers you want to skip Set “Skip” to “On” | |||
|
|
|
| ||
17