ENGLISH
12
3. Pull off the battery and separate it from the 3D Eyewear by
cutting off the wires, one by one, with scissors.
Insulate the wire parts of the removed battery with
cellophane tape.
Battery

NOTE

• Take sufcient care when performing this work so as not to injure
yourself.
• Do not damage or dismantle the battery.

Troubleshooting/Q&A

Check the followings rst. If they do not solve the problem,
please contact the place of purchase.

Cannot register a 3D Eyewear to TV.

Does the TV support on this 3D Eyewear?
Use the 3D Eyewear with compatible TVs. ( page 2)
Did you allow more than 1 minute to elapse after setting
the unit to the device registration mode?
The registration is automatically released if you allow more than
1 minute to elapse. Set the registration with the television and
connected 3D Eyeware placed as close to each other as possible.

Images are not 3D.

Is the TV has been registered with the 3D Eyewear?
Perform the registration with the TV to see. ( page 9)
Is the 3D Eyewear mode set to 3D?
Slide the tab once to the MODE position to change the mode between
3D and 2D.
Are the image settings switched to 3D images?
Refer the television operating instructions.