Panasonic WV-CS574 operating instructions Auto Mode Selection Auto

■Auto Mode Selection (AUTO

MODE)

1.To set auto mode

Move the cursor to AUTO MODE and select a mode with the joystick. Modes change as follows:

**	SET	UP MENU **
PRESET 1
MAP
HOME POSITION			OFF
SELF RETURN			OFF
AUTO MODE			AUTO PAN
AUTO PAN		KEY	AUTO PAN
DIGITAL FLIP			ON
SPECIAL1
CAMERA
RS485 SET		UP

PASSWORD LOCK OFF

2.When AUTO PAN is selected, set details as follows:

OFF SEQ SORTAUTO PANPATROL

Move the cursor to AUTO PAN O and press the CAM (SET) button to display the AUTO PAN setting menu.

3.To set a panning starting point and panning end- point

Follow the steps below.

(1)Move the cursor to POSITION and press the CAM (SET) button. The cursor moves to START.

** AUTO PAN **
	START
POSITION
	END
SPEED	••••••••
	L	H
ENDLESS	OFF
DWELL TIME	1S
PAN LIMIT	OFF
ZOOM LIMIT	OFF
RET
** AUTO PAN **
POSITION	START
	END
SPEED	••••••••
	L	H
ENDLESS	OFF
DWELL TIME	1S
PAN LIMIT	OFF
ZOOM LIMIT	OFF

RET

(2)Move the joystick to select a panning starting point and press the CAM (SET) button.

This determines the starting point and the cursor moves to END.

** AUTO PAN **
	START
POSITION
SPEED	END	••••
	••••
	L		H
ENDLESS	OFF
DWELL TIME	1S
PAN LIMIT	OFF
ZOOM LIMIT	OFF

RET

(3)Move the joystick to select a panning endpoint and press the CAM (SET) button.

This determines the endpoint and the cursor moves to POSITION.

4.To set a panning speed

Move the cursor to SPEED, and set a panning speed with the joystick.

** AUTO PAN **
POSITION	START
SPEED	END
	••••••••
	L	H
ENDLESS	OFF
DWELL TIME	1S
PAN LIMIT	OFF
ZOOM LIMIT	OFF

RET

The panning speed increases when the joystick is moved to the right, and decreases when it is moved to the left.

Caution:

If the panning range is changed after the camera has not panned for a long time or has been panning in the same panning range, the picture may not be clear or noise may appear. In such cases, pan the camera fully several times.

If this does not eliminate the problem, refer servicing to qualified service personnel.

5.To set ENDLESS to ON/OFF

Move the cursor to ENDLESS, and select ON or OFF with the joystick.

** AUTO PAN **
POSITION	START
	END
SPEED	••••••••
	L	H
ENDLESS	ON
DWELL TIME	1S
PAN LIMIT	OFF
ZOOM LIMIT	OFF

RET

ON: The camera pans from the starting point to the endpoint, and keeps rotating in the same direc- tion to return to the starting point. Set PAN LIMIT to OFF before ENDLESS is set to ON.

-32-