Panasonic WV-CS574 operating instructions Digital Flip Setting Digital Flip, Password Verification

AUTO PAN: Assigns the auto panning function to the button.

SEQ: Assigns the SEQUENCE function to the but- ton.

SORT: Assigns the SORT function to the button.

PATROL: Assigns the PATROL PLAY function to the button.

Note:

AUTO PAN LED on the controller does not light if something other than AUTO PAN is assigned. AUTO PAN does not stop with the AUTO PAN button.

If PASSWORD LOCK is set to ON, you cannot operate AUTO PAN, SEQ, SORT, and PATROL even by pressing the AUTO button.

■Digital Flip Setting (DIGITAL FLIP)

Move the cursor to DIGITAL FLIP and select ON or OFF with the joystick.

** SET UP MENU **

PRESET 1 MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1

CAMERA

RS485 SET UP

PASSWORD LOCK OFF

OFF: The tilt range is limited from 0 ° to 90 °.

ON: The digital flip function allows the tilt angle to widen up to 180 °. The image on the monitor screen is flipped horizontally and vertically at the tilt angle of approx. 135 ° (If the camera is installed on a ceiling).

Note:

The tilt range narrows from 0 ° to 90 ° if PAN LIMIT is set to ON.

Notes:

•Digital flip functions while moving the joystick down- wards. In case of moving the joystick to other direc- tions, it does not function.

•When OFF is selected for DIGITAL FLIP, the follow- ing operations are required to move the camera 180 ° vertically.

1)Move the joystick downwards to aim the camera down.

2)Move the joystick to the right or left to rotate the camera 180 ° horizontally.

3)Move the joystick upwards.

•To set the preset position directly from WV-CU360 System Controller, it is temporarily required to set both the electronic zoom function and digital flip function to OFF.

Tilt range setting is disabled between 90 ° and 185 °.

●Password Lock (PASSWORD LOCK)

Caution:

For security, do not operate your VCR for recording while the password menus are displayed on the monitor.

A 3-digit number is used for a password to limit access to all settings.

1.Move the cursor to PASSWORD LOCK, then select ON or OFF with the joystick.

** SET UP MENU **

PRESET 1 MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1

CAMERA RS485 SET UP

PASSWORD LOCK ON

** PASSWORD? ** 0 1 2 3 4 5 6 7 8 9

. . .

↑

OK RESET

NEW PASSWORD

RET

Note:

ON or OFF can be selected only after going through the password verification.

OFF: You can change all settings.

ON: You cannot change settings at all nor operate AUTO PAN, SEQ, SORT, and PATROL.

2. Press the CAM (SET) button.

Password Verification

3. The password verification menu appears.

3-1 Select a numeral for the first digit with the joy- stick, and press the CAM (SET) button. Though the entered password is not displayed, the up- arrow moves one character to the right.

3-2 Repeat the above step for the 2nd and 3rd dig- its.

Default: 123

3-3 The cursor moves to OK after all the three digits have been entered. Unless you want to change the password, press the CAM (SET) button.

If the correct password is entered, the screen returns to SET UP MENU. ON and OFF settings are the same as made on the SET UP MENU menu is as set in step 1.

If a wrong password is entered, the screen returns to the verification menu. Repeat steps 3-1 to 3-3 to verify the password.

-34-