Panasonic WV-CS574 Special 1 Menu Setting Special, Privacy Zone Privacy Zone, New Password

3-4 To cancel an incomplete password, move the cursor to RESET, and press the CAM (SET) but- ton. The screen returns to the verification menu.

3-5 To return to the SET UP MENU menu without ver- ifying the password, move the cursor to RET, and press the CAM (SET) button.

New Password

4.To change the password in step 3-3 above, move the cursor from OK to NEW PASSWORD, then press the CAM (SET) button. NEW PASSWORD menu appears.

** NEW PASSWORD? **

0 1 2 3 4 5 6 7 8 9

. . .

↑

. . .

OK RESET

RET

Note:

The NEW PASSWORD menu is accessible only after the verification has been completed.

The up-arrow mark appears indicating the first digit on the first line.

4-1 Enter a new three-digit password in the same way as in steps 3-1 to 3-2.

4-2 The cursor moves to OK after all the three digits have been entered. Press the CAM (SET) button to move the cursor to the first digit on the second line.

4-3 Enter the same password as the one you have entered on the first line.

4-4 The cursor moves to OK. Press the CAM (SET) button. If the new password is successfully entered, the screen returns to SET UP MENU.

4-5 Retry steps 4-1 to 4-4. If the first entry for the password is different from the second one, the screen returns to the NEW PASSWORD? menu.

4-6 To return to the SET UP MENU menu without changing the password, move the cursor to RET, and press the CAM (SET) button.

■Special 1 Menu Setting (SPECIAL 1)

●Privacy Zone (PRIVACY ZONE)

Up to 8 unwanted zones can be masked on the monitor screen.

1.Move the cursor to PRIVACY ZONE and select ON or OFF with the joystick. Press the CAM (SET) button to display the ZONE NUMBER setting menu.

** SPECIAL	1 **
PRIVACY ZONE	OFF
PROPO.P/T	ON
AREA TITLE	ON(USER)
PATROL	STOP
ALARM IN/OUT
CLEANING	OFF
EL-ZOOM	ON
PRESET ALM	OFF
IMAGE HOLD	OFF
TILT ANGLE	0°
RET

** ZONE NUMBER 1*/8 **

RET

ON: Preset privacy zones are veiled on the monitor screen.

OFF: The veiling function does not work.

2.Select a zone number with the joystick, and press the CAM (SET) button.

•A zone number followed by * (asterisk) indicates that the zone has already been registered.

** ZONE NUMBER 1*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

ZONE SCALE	••••••••
SET DEL	L	H
RET

•When a zone number having no * is selected, the picture is zoomed out (WIDE).

•When a registered zone number is selected, the camera moves to the preset position. Note that if you move PAN/TILT, ZOOM/FOCUS or ZONE SCALE in that position, the registered zone number having (*) is cancelled.

•The zone frame appears in the center of the screen if 3 or fewer mask areas exist in that picture and if the zone number is not registered yet.

•Up to 4 zones can be registered on the fully dis- played screen (WIDE).

-35-