Using Basic Phone Functions

3

 

Setting or Changing a Phone Password

 

 

 

 

 

Setting or Changing a Phone Password

You can set or change the password for your phone to prevent unauthorized use. To set a password for your phone:

STEP 1 Press the Setup button.

STEP 2 Select Set Password.

STEP 3 Enter a numeric password. Enter the same password twice.

STEP 4 Press save.

Accessing Voicemail

To access voicemail, press the Messages button on your phone. Your system administrator should configure your phone with the correct voicemail number so that pressing the Messages button automatically dials your voicemail system.

If you need to change the number for your voicemail (for example, if your phone is not part of a Cisco SPA 9000 Voice System and you have external voicemail), perform the following steps:

STEP 1 Press the Setup button.

STEP 2 Scroll to Voice Mail and press select.

STEP 3 Enter the number to dial for voicemail. For a Cisco SPA 9000 Voice System, this is normally “vmm.” For an external system, enter the phone number, including any digits you must dial to reach an outside line.

TIP To clear the field of a previous entry, press clear. To enter letters, press the Right navigation button to scroll, then press the alpha softkey.

STEP 4 Press save.

Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)

48

Page 55
Image 55
Cisco Systems 509G manual Setting or Changing a Phone Password, Accessing Voicemail, Select Set Password