Installing Your Phone

2

 

Upgrading Your Phone’s Firmware

 

 

 

 

 

Install the Firmware

STEP 1 Extract the firmware onto your PC.

NOTE If you are in a VPN connection, you may need to disconnect before proceeding so that your PC can communicate directly with your phone for the upgrade.

STEP 2 Run the executable file for the firmware upgrade (for example, double click upg-

spa504-6-2-0.exe).

STEP 3 Click Continue after reading the message regarding upgrading and your service provider.

STEP 4 Enter the IP address of your phone and verify the address of your PC.

STEP 5 Click OK. The system displays information about your phone’s current software and hardware.

STEP 6 Click Upgrade to begin the upgrade.

NOTE Do not disconnect your phone’s power until the upgrade is complete (the lights on your phone are no longer blinking).

STEP 7 Click OK to dismiss the status message of the upgrade.

Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)

25

Page 32
Image 32
Cisco Systems 509G manual Install the Firmware, Spa504-6-2-0.exe