Cisco Systems 509G manual Configuring Date and Time Parameters on Your Phone, Using Star Codes

Using Advanced Phone Features	4
Configuring Date and Time Parameters on Your Phone

Configuring Date and Time Parameters on Your Phone

Setting Your Phone’s Date and Time

The date and time for your phone normally come from the SIP proxy server or NTP server. However, if you need to change some date and time parameters, you can follow these steps:

STEP 1 Press the Setup button.

STEP 2 Select Time/Date.

STEP 3 Enter the date in the following format: mm*dd*yy (this will display as m/d).

STEP 4 Enter the time in the following format: hh*mm*ss (this will display as (h:mm).

STEP 5 If the time does not display am (a) or pm (p) correctly, adjust with Offset. To change from a.m. to p.m., enter *12*00*00, to change from p.m. to a.m., enter #12*00*00.

STEP 6 Press save.

You can set just one of these choices, if necessary.

Using Star Codes

Your IP phone can support numerous “star codes” to access phone supplementary services. These codes, which start with *, are entered before dialing a telephone number and provide services. For example, to block caller ID (star code 67), you would dial *67, followed by the telephone number you are calling.

Following is a list of commonly-used star codes. Some star codes may not be available to you; consult your system administrator for more information.

Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 60