Cisco Systems 509G Adjusting Call Volume and Muting, Placing or Answering a Call, Using Mute

Using Basic Phone Functions	3
Adjusting Call Volume and Muting

Adjusting Call Volume and Muting

You can also change call volume settings from your PC using the IP Phone Web

Interface. See “Adjusting Audio Volume” section on page 74.

Adjusting Call Volume

To adjust the volume of the handset or speaker, lift the handset or press the Speaker button. Press + on the Volume button to increase the volume, or press - to decrease the volume. Press Save (except on the Cisco SPA 501G model)

Adjusting the Ringer Volume

To adjust the ringer volume, press the Volume button when the handset is on the phone and the speaker button is off. Press Save (except on the Cisco SPA 501G model).

Using Mute

To mute the phone microphone, speaker, or headset microphone, press the Mute button on the phone. The button glows red. Press the Mute button again to unmute.

If no audio device is on, pressing the Mute key has no effect. When switching from the speaker phone to the handset, mute is turned off automatically.

Placing or Answering a Call

NOTE You may have to dial a number or numbers to reach an outside line. Ask your phone administrator.

To place or answer a call, do one of these:

•Pick up the receiver.

•Press the Speaker button.

Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 29