Using the Cisco SPA 500S Attendant Console

6

 

Using the Cisco SPA 500S

 

 

 

 

 

Using the Cisco SPA 500S

The functions of Cisco SPA 500S buttons may differ depending on configuration. However, in general, you can:

Monitor an extension by viewing its color. The LED color of a line button gives you information about the line being monitored:

-Green: The line is idle.

-Red (steady): The line is in use.

-Red (blinking): The line is ringing.

-Orange (steady): The line is not registered; there is a problem with phone connectivity.

-Orange (blinking): The line is not configured properly.

-Off: The line is not configured.

Transfer an active call by pressing the line button on the Cisco SPA 500S. (This requires that the line button is configured as a speed dial for the number to which you are transferring).

Dial a configured extension by pressing the green line button on the Cisco SPA 500S.

Pick up a call ringing at the extension by pressing the flashing red line button.

Monitoring the Cisco SPA 500S

To view the status of the Cisco SPA 500S:

STEP 1 Log in to the web interface.

STEP 2 Click the Att Console Status tab.

Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)

86

Page 93
Image 93
Cisco Systems 509G manual Using the Cisco SPA 500S, Monitoring the Cisco SPA 500S, Click the Att Console Status tab