Cisco Systems 509G manual Using Phone Hardware and Accessories, Using the Speakerphone

Using Basic Phone Functions	3
Using Phone Hardware and Accessories

Using Phone Hardware and Accessories

Using the Speakerphone

To use the speakerphone, press the Speaker button (the handset can be either on or off hook).

Using the Headset with Your IP Phone

Install the headset as described in the “Connecting Wired and Wireless

Headsets (Optional)” section on page 21.

NOTE Steps to use your headset with the IP phone may vary. Consult the user documentation for your headset for more information.

To use a wired headset, press the Headset button on your phone and dial the number to place a call, or press the headset button to answer a ringing call.

To use a wireless headset, lift the receiver off hook before speaking or listening through the headset.

Switching Between the Handset/Headset/Speakerphone

During a Call

Any of these audio devices can be used during a call. Only one device at a time can be used.

The handset can be on the hook when using the speakerphone or headset function. If switching from the handset to the speakerphone, make sure the speakerphone or headset light is illuminated before placing the handset back on the hook. (If you are switching from the handset to a wireless headset, however, do not replace the handset or you will disconnect the call.)

Sending Audio to the Phone Speaker

Choosing this option sends audio to the speaker when the handset is lifted.

Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP) 27