Panasonic VDR-D250GN Adjusting LCD monitor/viewfinder, Press the Power LCD button, Lcd Set

LSQT1025(ENG).book 48 ページ ２００６年２月４日 土曜日 午後６時１０分

Adjusting LCD monitor/viewfinder

Adjusting LCD monitor/viewfinder

Setup

Adjusting the brightness and colour level

1Press the MENU button, then select [ SETUP]

# [ LCD SET] or [ EVF EVF SET] # [YES] and press the joystick.

2Move the joystick up or down to select the item to be adjusted. Then, move the joystick left or right

to make the adjustment.

The bar display moves.
[	LCD SET]
:	Brightness of the LCD monitor
:	Colour level of the LCD monitor
[ EVF EVF SET]
EVF : Brightness of the viewfinder
≥ To adjust the brightness of the viewfinder, close the		≥ These settings will not affect the images actually
LCD monitor and extend the viewfinder to activate		recorded.
it.

≥When the LCD monitor is rotated by 180° towards the lens, the brightness and colour level of the LCD monitor cannot be adjusted.

∫In order to increase the brightness of the entire LCD monitor

Press the POWER LCD button.

The [ ] indication appears on the LCD monitor.

≥ The entire LCD monitor will become approx. twice as bright as the normal.

≥When the POWER LCD button is pressed again,

the [ ] indication disappears and the original brightness is restored.

≥This will not affect the images to be recorded.

≥If you turn on the unit when the AC adaptor is used, this function will automatically be activated.

48

LSQT1025